The Anhydrous Ammonia Cylinder Emergency Kit is designed to contain leaks at the valve and side wall of ammonia cylinders conforming to DOT specification 3A480 & 4AA480. The Kit includes EPDM molded gaskets, valve containment device, side wall patching device and an ammonia valve yoke with adapter. All kit parts are labeled and color coded blue for ammonia use. Two instruction booklets explaining the application of each device are included.
Emergency Kit Devices Include:
Device #1: designed to contain leaks in and around the cylinder valve. Device #1 will accommodate cylinders up to 15" in diameter with either bumped or foot-ring cylinder bottoms.
Device #8: a patching device designed for sealing leaks in the cylinder side wall.
Features Exclusive to the Ammonia Kit:
1ANH Hood - Ammonia steel outlet valve
1EPR Gasket -Molded EPDM Hood Gasket
8DNH Patch - Formed with a larger sealing radius to match ammonia cylinders
8-9EP Gasket - Molded EPDM Patch Gasket
102NH Wrench - Open-end wrench to fit ammonia cylinders
A-9NH Valve Yoke - Standard valve yoke for ammonia cylinder use
A-10NH Valve Adapter - Standard valve adapter for ammonia cylinder use
All parts are labeled with ammonia part numbers and color coded blue
Hood Assembly (with 3 cap screws & Vent Valve 1V)
Gasket, Molded from Viton*
Base Assembly (with Chains 1F)
Gasket, Molded from Viton*, 1-3/8" dia. x 5/8" thick
Wrench, 3/8" sq. box, 1-1/4" open end x 7-1/4" long
Wrench, straight open end, 1-1/4" x 1-1/8" x 12-1/8" long
Wrench, double box, 7/16" x 9/16" x 8-3/4" long
Hammer, machinist 3 lb.
Drift Pin, 9/32" x 1/2" x 6" long
Drift Pin 7/8" x 1-1/4" x 8" long
Kit Box Seals